Installing The Red Hat Enterprise Linux As 6.5 Operating System - Lenovo ThinkServer RD550 Operating System Installation Manual

f. Click Finish.
Go to the Expert Partitioner window, the created root partition, boot partition, and swap partition are
displayed. Click Accept. The drive partition is finished.
9. In the Installation Settings window, click Software to select your desired software programs, and then
click OK. If the YaST window is displayed, click Accept.
10. Click Install to install the software programs that you have selected.
Notes:
• If a Warning window is displayed, select the option as you desired. the following steps are based on
the scenario that Ignore this conflict of ... is selected. Do the following:
a. Click OK-TryAgain.
b. In the YaST window, click Accept.
c. In the Installation Settings window, click Install to begin the installation.
• If the YaST2 window is displayed, click Install to begin the installation.
11. When the Confirm Installation window is displayed, click Install. When the installation process is
completed, the server restarts automatically.
12. The setup process continues after the server restarts. Set your root user password. Then, select Next
and press Enter. When the YaST2 window is displayed, click Yes.
Note: The password must contain at least six characters and consist of upper case letters, lower
case letters, and numbers.
13. Set your host name and domain name. Then, click Next.
14. Configure your network in the Network Configuration window. Then, click Next.
Note: If the Test Internet Connection window is displayed, configure the settings as you need. Then,
click Next.
15. In the Network Services Configuration window, click Next.
16. In the User Authentication Method window, configure the settings as you need. Then, click Next.
17. In the New LDAP User window, configure the settings as you need. Then, click Next ➙ Yes.
18. In the Release Notes window, click Next.
19. In the Hardware Configuration window, click Next.
20. In the Installation Completed window, click Finish.
21. Follow the instructions on the screen to log in to the operating system.

Installing the Red Hat Enterprise Linux AS 6.5 operating system

This topic provides instructions on installing the following two operating systems:
• Red Hat Enterprise Linux AS 6.5 (X32) operating system
• Red Hat Enterprise Linux AS 6.5 (X64) operating system
Note: If the SATA configuration for your server is set as RAID, be sure to install the drivers for RAID after the
operating system installation is finished. See "Installing the driver for a RAID card" on page 44.
To install the Red Hat Enterprise Linux AS 6.5 operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. Depending on the SATA configuration on your serve, do one of the following:
18
ThinkServer RD550 and RD650 Operating System Installation Guide