Table of Contents
Advertisement
Retrieving Images
IMPORTANT:
Without optional memory card
installed all images are stored on the internal
memory and may only be viewed by downloading to
a computer or a TV monitor from the unit.
Connect the unit to a Windows 2000/ME/or XP
computer system with a USB jack or a TV Monitor
with a video jack. If an optional SD card was used it
can be removed and read with an optional card
reader.
TV Image Viewing
Move the Mode Switch to Setup. Connect unit TV
OUT to a VIDEO IN jack on your TV. Use the _ or _
buttons to scroll through recorded images. Video
cable included.
Connect to a
TV Monitor
Computer Image Viewing
Move the Mode Switch to Setup. Connect unit USB
OUT to a USB jack on your computer. Double click
"My Computer" on the desktop and browse
"removable disk". All your images will be stored
inside. Images can be downloaded to your hard disk
and edited or printed as desired. The first image in
the video mode is still and contains time and date
information for the video clip. USB cable included.
Connect to a Computer
Take Optional SD Memory Card
to Processor
SD Memory Card
Your computer may read this card
with a reader or take the card to a
photo processor for prints.
IMPORTANT: Always turn unit off
when inserting or removing a
memory card to avoid damage and
ensure that the camera properly
updates the memory information.
Handheld
If required you can use the system as
a normal camera. Move the Mode
Switch to Handheld, close case and
wait for Status light to stop flashing.
Using the viewfinder and shutter
button you may take still or video clips
as determined in the Setup mode.
Page 6
Hide quick links:
Advertisement
Table of Contents
