Moultrie DIGITAL GAME CAMERA Instruction Manual page 8

Operating the System
Laser Aiming (optional)
Use the Laser Aim or Infrared Test to
position camera as desired. Activate
the laser by pressing the
button. The LCD display will indicate
that the laser is ON.
Press the Laser Aim
turn the laser off when not needed. The
laser will shut off automatically after
one minute.
Note: Aiming laser will function only in
SETUP and AUTO modes.
Laser Classification
Class II Laser Product
Wavelength: 650nm
Maximum Output: < 1mW
CAUTION: Looking into the laser
beam may be hazardous to the eyes.
Do not stare into the beam or direct it
towards other people unnecessarily.
CAUTION: Use of controls or
adjustments or performance of
procedures other than those specified
herein may result in hazardous
radiation exposure.
WARNING: Looking directly into the
beam with optical aids (e.g. binoculars,
telescopes) can be hazardous to the
eyes.
CAUTION
DO NOT STARE INTO BEAM
AVOID EXPOSURE: Laser radiation
is emitted from this aperture.
Warning and Aperture Label
Located next to laser aperture
Page 7
Laser Aim
button again to
LASER RADIATION
DIODE LASER
1mW MAX OUTPUT at 650 nm
CLASS II LASER PRODUCT
Product complies with applicable
requirements of 21 CFR 1040.10
and 1040.11
Questions or Problems Contact:
Moultrie Customer Service
(205) 664-6700
150 Industrial Rd. Alabaster, AL 35007
Model Number: 00094 60089
Serial Number:
Manufacturer:
Global Point Products, Farmington, NY 14425
This Product complies with applicable requirements of 21 CFR
1040.10 and 1040.11
No user serviceable parts inside.
ID/Certification Label
Located in battery chamber
60099