Switching The Coffee Machine On And Off - Miele CVA 6800 Operating And Installation Instructions

Switching on
When the coffee machine is switched
on, it heats up and rinses the pipework.
This not only cleans the pipework, but
also warms it before coffee is prepared.
If the coffee machine still has an
operating temperature which is
higher than 60 °C, then rinsing will
not take place.
^ Touch the On/Off sensor K.
Tip: If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container (e.g. the
small cleaning container) underneath
the central spout before preparing the
first coffee of the day.
The appliance will begin rinsing after
the heating-up phase. Hot water will
come out of the central spout.
You can now prepare drinks.

Switching the coffee machine on and off

Switching off
^ Touch the On/Off sensor K.
After a coffee has been dispensed, the
pipework is rinsed before the machine
switches off.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time, e.g.
whilst on holiday:
^ Empty the drip tray, the waste
container and the water container.
^ Clean all components thoroughly,
including the brew unit, the central
spout connector and the small drip
tray located inside the door.
^ Switch off the appliance.
If the appliance door is to be left
open for a long time, it is advisable to
switch off at the wall or the fuse to
save energy.
25