Accessories; Maintenance; Protecting The Environment; Technical Data - Black & Decker Hammer Drill Manual

Selecting the direction of rotation
For drilling and for tightening screws, use forward (clockwise)
rotation. For loosening screws or removing a jammed drill bit,
use reverse (counterclockwise) rotation.
To select forward rotation, push the forward/reverse
N
slider (3) to the left.
To select reverse rotation, push the forward/reverse slider
N
to the right.
Warning! Never change the direction of rotation while the
motor is running.
Selecting the drilling mode
For drilling in masonry, set the drilling mode selector (5) to
N
the position.
For drilling in other materials and for screwdriving, set the
N
drilling mode selector (5) to the position.
™
KR60L/KR70L - Levelok
This tool is fitted with an indicator to facilitate straight
drilling. This feature can be used both in horizontal and in
vertical position. The indicator is activated while the tool is
connected to the mains.
Position the tool as required.
N
Slowly move the rear of the tool until the red indicator (4)
N
lights up and remains on.
Switching on and off
To switch the tool on, press the variable speed switch (1).
N
The tool speed depends on how far you press the switch.
As a general rule, use low speeds for large diameter drill
bits and high speeds for smaller diameter drill bits.
For continuous operation, press the lock-on button (2) and
N
release the variable speed switch. This option is available
only at full speed.
To switch the tool off, release the variable speed switch.
N
To switch the tool off when in continuous operation,
press the variable speed switch once more and release it.

Accessories

The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you will
get the very best from your tool.

Maintenance

Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots with a clean, dry
N
paint brush.
straight drilling indicator
To clean the tool, use only mild soap and a damp cloth.
N
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

Technical data

Voltage
Power input
No-load speed
Weight
Max drilling capacity
Steel/concrete
Wood
KR60 KR70
V 230 230
AC
W 600 730
-1
min 0-3,000 0-3,000
kg 2.3 2.3
mm 13 13
mm 25 25
5