Black & Decker 90528103 User Manual
Black & Decker 90528103 User Manual

Black & Decker 90528103 User Manual

Black & decker cordless three-position pivot drill/screwdriver


New Zealand


Table of Contents

Summary of Contents for Black & Decker 90528103

  • Page 1 Ireland Australia New Zealand...
  • Page 4: Intended Use

    Intended use Your Black & Decker cordless three-position pivot drill/ screwdriver has been designed for drilling in wood, metal and plastics as well as for screwdriving purposes. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all instructions.
  • Page 5 tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation.
  • Page 6 Labels on tools Warning! To reduce the risk of injury, the user must read the instruction manual. Additional safety instructions for batteries and chargers Batteries Never attempt to open for any reason. Do not expose the battery to water. Do not expose the battery to heat. Do not store in locations where the temperature may exceed 40 °C.
  • Page 7: Maintenance

    thumb to press the pivot lock release button (4) when changing positions. Do not use the screwdriver as a pry bar in any position. Switching on and off (fig. E) To switch the tool on, press the on/off trigger switch (7). To switch the tool off, release the on/off trigger switch (7).
  • Page 8: Protecting The Environment

    Your charger does not require any maintenance apart from regular cleaning. Warning! Before performing any maintenance on the tool, remove the battery from the tool. Unplug the charger before cleaning it. Regularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth.
  • Page 9: Ec Declaration Of Conformity

    Technical data HP362 Voltage Vdc 3.6 Output torque (max) Nm 6 No load speed rpm 0-200, 0-600 Bit holder mm 6.35 Weight kg 0.48 Battery type A36 Charger Voltage Approximate charging time Weight EC declaration of conformity HP362 Black & Decker declares that these products conform to: 98/37/EC, EN 60745 Level of sound pressure according to EN 60745: Sound pressure (L...
  • Page 12 90528103 12/07...

This manual is also suitable for:


Table of Contents