Table of Contents
Advertisement
Available languages
Available languages
How to Remove a
microSD™ Card
1. Remove the back cover and
gently push the card inward,
this will release the exposed
edge of the microSD™ card
to eject it.
2. Remove the microSD™ card
from the slot and replace the
cover.
NOTE
Do not attempt to remove the
microSD™ card while reading or
writing to the card.
Users wishing to transfer or
download music onto a microSD™
card inserted into this phone
(through MTP Sync) should format
the microSD™ card on this phone
before using it (with the phone
unlocked, touch Menu > Settings
> Memory > Card Memory >
Format). Warning: Formatting
the microSD™ card will erase all
contents on the card. In the event
the microSD™ card is used on this
phone without first formatting it,
the phone will display "License
acquisition failed" during MTP
Sync. Song files downloaded or
otherwise purchased from third
party providers and stored on
a microSD™ card inserted into
this device may be protected or
encrypted by such provider and
may not be playable on this device.
Getting Started with Your Phone
Battery Temperature
Protection
Though extremely rare, if the
battery becomes overheated, the
phone will automatically turn off.
When you turn the phone back
on, a message pops up alerting
you that the phone was powered
off for your safety.
Battery Charge Level
You can find the battery charge
level at the top right corner
of the LCD screen. When the
charge level approaches low, the
battery sensor sounds a warning
tone, blinks the battery icon, and
displays a warning message.
As the charge level approaches
empty, the phone automatically
switches off without saving any
current tasks.
Signal Strength
Call quality depends on the signal
strength in your area. You can
tell how much signal strength
you have by the number of bars
next to the signal strength icon:
the more bars, the stronger the
signal. If you're having problems
with signal quality, move to
an open area or, when inside
25
Advertisement
Chapters
Table of Contents
