Remote Kill,Stun, Activate And Revive - Maas AHT-9-UV User Manual

REMOTE KILL, STUN, ACTIVATE AND REVIVE
If you want to use remote kill, stun, activate and revive, please program signalling for
current channel as DTMF and 2/5tone.
REMOTE KILL: If the radio received DTMF code programmed as remote kill, the radio will
enter the remote kill status; radio cannot send or receive signals. If the
radio received DTMF code programmed as revive, the radio will quit the
remote kill status and enter normal operation. In this situation, the radio
only can be revived by programming software, the method is as follows:
read data from radio first and then click program•Optional Features•
Optional Signal•Common Set, and select "Normal" in the "Remote Kill
Type", then save the data to the radio.
REMOTE STUN: If the radio received DTMF code programmed as remote stun, the radio
will enter the remote stun status; radio can only receive signals and
cannot send signals. If the radio received DTMF code programmed as
58