5-Tone Part - Maas AHT-9-UV User Manual

Make 2-tone call with the transceiver
1) Power on, then select the channel with 2-Tone signal
2) Press [ ] key, LCD displays "CALL/2T?",
then press [
transmit a single tone/Group call. If the corresponding call list
has not been edited, it will sound "DU".

5-Tone Part

Edit 5tone message
Click in sequence "program•Optional Features•Optional Signal•5-Tone" to program
5-Tone ID and 5-Tone international standard group.
The group numbers 0-9 in the call list is used to edit the 5tone ID of the radio you want to
call. You can put 0-9, A, B, C, D and number (including repeated ID)
The group in the international standard are: CCIR1, CCIR2, CCITT, EEA, EIA, NATEL,
ZVEL1, ZVEL2, 9 groups in total.
Select one of them and input self ID (input in ID), and then write into the radio.
] key to transmit 2-Tone while press [ ] to
55