Maas AHT-9-UV User Manual page 41

18) Power-on Display setting (OPN.SET&VLT&PON.MSG---MENU 20&21&22)
Functions: choose power-on display mode and edit power-on message
Enter Menu 20
OFF: display model version
DC: battery power voltage
MSG: power-on message
Enter Menu 21
Enter Menu 22
program software.
Using [ ] / [
19) Repeater Shift setting (OFFSET&S-D---MENU 23&28)
Functions: repeater stations, usually located on mountaintops or other high locations,
provide a dramatic extension of the communication range for low-powered
hand-held or mobile transceivers.
Under VFO mode, you can set the magnitude and direction of the repeater shift.
Enter Menu 23
Available values: 0.00 ~ 99.95 MHz
Enter Menu 28
to set OPN.SET. Default: OFF.
th
to check battery voltage.
st
to edit power-on message, also you can edit it directly by
nd
] to select character; [
to set magnitude of the repeater shift.
rd
to set the repeater shift direction. Default: OFF.
th
] / [ ] to switch cursor position.
35