2-Tone Part - Maas AHT-9-UV User Manual

Make MSK call with the transceiver
1) Power on, then select the channel with MSK signal
2) Press [ ] key, LCD displays "CALL/DTMF?",
then press [
call list message. If the corresponding call list has not been
edited, it will sound "DU".
e.g.: program the above frequency and MSK signal into two radio.
input ID code 1234 into radio A, and input 2345 into radio
B. Press [
then press [
A with B, press [
then press [
just input the ID code of that radio.

2-Tone Part

Edit 2Tone message:
Step 1: Edit the Fast Call list via programming software, radio can store up to 10 groups
(0-9) last calling list in total
Step 2: Input the encoding-requested A-Tone (the first tone), B-Tone (the second tone)
and the gap time between A-tone and B-tone, the default setting is 100S
In encoding, A tone will sound 1S while B Tone will sound 3S. But when there is
only A tone in the call list as group call tone, A tone will sound 5S. Please refer to
] – [ ] keys to make call with the desired
], LCD displays "CALL/MSK?",
], you can call B with A. if you want to call
], LCD displays "CALL/MSK?",
], that is to say, if you want to call one radio,
53