Stealth Cam STC-G30 Instruction Manual page 12

CAMERA P ROGRAMMING -­‐ C USTOM ( CONT)
Ø TIME FORMAT – 12 HOUR ( default): T his s etting i s u sed t o t ell c amera i f t he t ime p rogrammed
and displayed on the Info Bar should be in the basic 12 hour (AM/PM) format or the 24 hour
(military) f ormat. W ith t his o ption b linking, p ressing t he U P o r D OWN a rrow b uttons w ill c ause
the camera to cycle between the two options. NOTE: Should the format be changed to 24
hour, the previous SETUP TIME will now be adjusted as such and remove the AM/PM part of
the t ime.
MODE – This setting is used to tell the camera how it should take its images. The camera is
Ø
equipped with TRIAD Technology, allowing for 3 different options to be selected by the user.
With t his o ption b linking, u se t he U P o r D OWN a rrow k ey t o m ove b etween t he o ptions o f: P IR
PHOTO, PIR VIDEO, or TL. Based upon the selection chosen the menus for the camera will
change.
PIR PHOTO (default): In this mode the camera will take a designated amount of picture
o
with a designated time out when the camera senses activity in front of the unit. This
mode i s a vailable f or b oth d ay a nd n ight a ctivities.
§ PHOTO RES – 4.0 MP (default): This setting is used to determine the Megapixel
resolution o f e ach i mage t aken b y t he c amera. W ith t his o ption b linking, u se t he U P
or D OWN a rrow k ey t o m ove b etween t he o ptions o f: 8 .0 M P, 4 .0 M P, 2 .0 M P o r . 5
MP. The higher the resolution of an image the more space the file will take on the
SD m emory c ard.
PIR DELAY – 00min 05sec (default): This setting is used to determine the length of
§
the time that the camera will wait before it reinitializes its PIR sensor for the next
activation. With the TL mode this setting is only active if TL Delay is set to 1 min or
greater. This setting can be changed between the numbers of 00min 05sec to
59min 59sec. With this option blinking, use of the UP and DOWN arrows will
www.stealthcam.com P age
877-­‐269-­‐8490
12