Basic Operating Steps - FaVal MERCURY S100 Operating Instructions Manual

7. Basic Operating Steps

_______________________________________________________________
Program
Define the channel the receiver should switch on here.
7. Basic Operating Steps
Switch between radio mode and TV mode
To switch between radio mode and TV mode, press the "TV/RADIO" button.
Channel select
To go to the previous channel or next channel, press the arrow buttons "CH ▲"
and "CH ▼" on the remote control.
You can also switch directly to a channel by entering the memory location
number of the desired channel with the number buttons.
Volume
To raise or lower the volume, press the volume buttons "VOL◄" and "VOL ►".
To mute the receiver, press the "MUTE" button.
Program Guide (EPG)
To view additional information about the current program, the following
program or the program of the selected channel, press the "EPG" button. To
receive further information, first select the corresponding program with the "CH
▲" and "CH ▼" buttons and then press the "OK" button. To leave the menu,
press the "EXIT" button.
_____________________________________________________________________
EPG: Electronic Program Guide with current and upcoming program
information. The information is fed from the respective channels. How far
in advance the information is varies from one channel to the next. The
EPG can be directly selected with the "EPG" button.
Channel list
Press the "OK" button of your remote control during normal TV operation and
the numerically sorted program list appears. In the right edge of the screen,
additional information about the selected channel is shown.
On the upper edge of the screen there are colored (red, blue, green, yellow)
additional menus which you can call up by pressing the corresponding color
button on your remote control.
18