Using The Self-Timer; Using Burst - Kodak EASYSHARE C142 Extended User Manual

Taking pictures/videos

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. For best results, place the camera on a tripod or steady surface.
You can turn on the self-timer using a shortcut
1 Press the Menu
2 Press to choose a Self-timer setting:
10 Seconds—
to get into the scene).
2 Seconds—
2 Picture Timer—
second picture is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
To take a video after a 2- or 10-second delay, use the same procedure but press the
Shutter button completely down.

Using burst

Use the burst feature to take up to 3 pictures in rapid succession. You can turn on
burst using a shortcut
1 Press the Menu
2 Press to choose Self-timer/Burst, then press
3 Press the Menu
4 Compose the scene. Press the Shutter button halfway, then completely down
and hold it.
The camera stops taking pictures when you release the Shutter button, when pictures
are taken, or when there is no more storage space. Burst is unavailable in some modes.
12
button. Press
A picture is taken after a 10-second delay (so you have time
A picture is taken after a 2-second delay.
The first picture is taken after a 10-second delay. A
(see page 11) or these steps:
button.
button.
(see page 11) or these steps:
to choose Self-timer, then press OK.
to choose Burst On.
www.kodak.com/go/support