NICAM
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (transmis-
sion in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound.
Open "MENU"
1
Press the MENU button.
with the VCR in stop mode.
Select "Setup"
2
Using the
to "Setup" then press
Select "System"
3
Using the
to "System" then press
Programme
Select "NICAM"
4
Using the
to "NICAM" then press
NICAM option is selected.
Programme
Downloaded From Disc-Player.com Samsung Manuals
❷
buttons, move the selection bar
❿
or OK button to select.
❷
buttons, move the selection bar
❿
or OK button to select.
❷
buttons, move the selection bar
❿
or OK button until
System
VCR
Front Display
: Automatic
NICAM
OFF
AV1 Output
On
5
To...
Press
Mono mode
Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM broad-
cast if the stereo sound is dis-
torted due to inferior reception
conditions.
NICAM mode On is displayed.
On: Normally set at this position.
On completion, press RETURN three times to
6
exit the menu.
AV 1 Output
Front Display : Automatic
NICAM
AV1 Output
Programme
• RGB : Sends RGB signal from the AV JACK
(SCART terminal)
• Video : Sends COMPOSITE VIDEO signal from
the AV JACK (SCART terminal).
❷
or
, until...
: On
Video
RGB
English - 43