Table of Contents
Advertisement
Camera Properties
You can set the following camera properties using camera controls: Display Off time,
PowerSave time, Enable Sharpening, Dropdown Menu Lag Time, Use FOLDER01,and
Resolution. You can also specify Custom Functions settings. The list of properties may
change as new versions of firmware become available.
Setting Display Off Time
Extended use of the Back LCD panel can drain your battery.
To change the length of time before the Back LCD panel turns off:
1
Select the Menu icon, then
choose Properties from the
dropdown menu (page 2-11).
1
With the Properties menu
displayed, select Display Off
Time.
The Display Off Time screen
appears.
This screen (and the Powersave
screen) operate a little
differently than the others.
2
Press and hold the DISP/MENU
button.
A vertical arrow appears at the
right of the screen.
3
While continuing to press the
DISP/MENU button, rotate the
Quick Control dial to change the
highlighted number.
4
Release the DISP/MENU button
The vertical arrow goes away
and the changed number is
displayed on the screen.
6
6-21
Advertisement
Table of Contents
