Kodak DCS 500 Series User Manual page 235

Viewfinder
Information:
Depth of Field Preview: Possible, by operation of Depth-of-field Preview button.
Light Metering:
A-2
VIEWFINDER
1) Within viewing area:
Five focusing points, fine spot metering area mark (with
Ec-CII)
2) Below viewing area:
Shutter speed, aperture value, (AE lock, blinks at 2 Hz
during AEB operation), M (manual),
completion indicator),
compensation or flash exposure compensation is set),
(in-focus indicator, blinks at 8 Hz when AF is
impossible)
3) To the right of viewing area:
Exposure level scale (±3 stops in 1/3-stop increments),
exposure level indicator (1) AE mode, exposure
compensation amount, (2) AE lock, real-time meter
deviation value, (3) manual exposure level, (4) AEB
step amount, (5) background exposure when using
flash).
EXPOSURE CONTROL
TTL full-aperture metering using a 12-zone SPC (silicon
photocell). Five metering modes available:
1) Evaluative metering.
2) Partial metering covers approximately 23% (DCS 520)
and 15% (DCS 560) of the central picture area
3) Fine spot metering covers approximately 6% (DCS
520) and 4% (DCS 560) of the central picture area. In
continuous exposure mode, first frame metered in real
time, second and successive frames shot at same
settings (AE lock).
4) Spot metering covers approximately 9% (DCS 520) and
6% (DCS 560) of the picture area at each AF frame
position.
5) Center-weighted average metering.
+
(flash charge
+
- (lights when exposure