Advertisement
Technical Aspects of your machine
MAX.
19
10
11
9
2
Extension
3
Knob
4
1
6
8
5
7
14
1
Motor Unit
Gross weight
2
Handle
Net weight
Exhaust Cover Locking / Unlocking Part
3
Voltage / Frequency
Exhaust Cover
4
Adapter Isolation Class :
5
Container
Dimensions
Container Locking / Unlocking Part
6
Power
Wheels
7
Hose ‹nlet Part
8
Protection Class
Hose
9
Water/Liquid Suction Capacity : 11 lt.
Hose Outlet Part
10
Extension Tubes
11
Small Brush
12
13
Compact Head
14
Floor Brush
15
Crevice Tool
16
Air Distributing Part
All declared values on the product and on the printed
17
Water Separator
leaflets are picked up after laboratory measurements
Hepa Filter
18
performed according to related standarts. These values
19
Measuring Cup
may differ upon usage and ambient conditions.
Hepa filter cleaning brush
20
Spare hepa filter
21
Hepa filter sponge
22
Spare hepa filter sponge
23
3
17
12
18
15
13
21
20
16
22
23
: 10.4 kg
: 8.6 kg
: 220-240V~ 50/60 Hz
: 635 x 405 x 405 mm.
: 1800 W max.
: IPX 4
Using your machine
Preparation for Use
Fill 1,5 liters of water into the container.
The water level should not exceed the
"MAX" level indicated on the container.
Fit the air distributing part by sliding it
into its slot located on the container.
Put the water separator on the container
(Figure 5) (Figure 6)
and place the HEPA filter on top of it.
Place the motor unit on the container
and secure it by locking the container
locking/unlocking parts on each side.
Connect the hose to the inlet socket
located on the container. Attach the
extension tubes, which have been
mounted to each other, to the hose
handle. You can connect only one
extension tube instead of two tubes or
you can attach the accessories directly
to the hose handle without using any
tube.
(Figure 1)
(Figure 2)
(Figure 3)
(Figure 4)
4
(Figure 7)
(Figure 8)
(Figure 9)
(Figure 10)
(Figure 11)
(Figure 12)
(Figure 13)
(Figure 14)
Advertisement
