Setting A Flash Default - Kodak DC240 User Manual

Setting a Flash Default

You can adjust your camera so it is set to a specific flash setting every time
you turn on the camera. For more information about the Flash setting, see
page 15.
1
Set the Mode dial to Camera Setup.
2
Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3
/
Press a button until the
is highlighted.
4
Press the DO-IT button.
The Flash Default screen appears. The
current setting is checked (ä).
5
/
Press a button until the Flash
option you want is highlighted.
q
AUTO (Main Default)—flash fires
when needed. Ideal for everyday
picture-taking situations.
q
FILL—flash fires every time you take
a picture. Ideal for pictures outside
under heavy shade.
q
RED EYE—flash fires once so the
eyes become accustomed to the flash,
then fires again when the picture is
taken. Ideal for pictures of people.
q
OFF—flash does not fire. Ideal for
taking pictures where flash is
prohibited.
6
Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
icon
5
51