Adjusting The Video Out Signal - Kodak DC240 User Manual

Adjusting the Video Out Signal

You can set your camera so it is compatible with NTSC or PAL video
signals. The Video Out feature needs to be set correctly if you plan on
running a slide show of the pictures from the camera on a television or
video monitor. For information on setting up a slide show, see page 40.
1
Set the Mode dial to Camera Setup.
2
Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3
/
Press a button until the
icon is highlighted.
4
Press the DO-IT button.
The Video Out screen appears. The current
setting is checked (ä).
5
/
Press a button until the video out
option you want is highlighted.
q
NTSC—used in most countries
except Europe. The United States
uses NTSC.
q
PAL—used in European countries.
6
Press the DO-IT button to accept the
change and return to the main Camera
Setup screen.
5
49