Table of Contents
Advertisement
Note:
¡ To prevent from damage to the unit, be sure to follow the wiring diagrams below.
¡ Be sure to fully plug in the connectors. Secure them with clamps and tapes.
¡ All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or
your dealer if other methods are required.
¡ Installation of this product may interfere with the grounding properly. In such a case, connect the ground lead of the
external equipment to be connected to the mounting bolt r that secures this product.
¡ The pre-out connector is used exclusively to an external amplifier. Accordingly, do not connect the audio input termi-
nal and the like of other external devices to this connector.
3
1
2
*Fuse (15 A) Refer fuse replacement to
your nearest authorized Panasonic
Service Center. Do not try fuse replace-
ment by yourself.
VIDEO OUT
PRE OUT FRONT
PRE OUT REAR
REMOTE OUT
AV2 IN
CAMERA IN
CQ-VD5005W
(Rear)
Radio Antenna Connector (RADIO ANT IN)
Video Output Terminal (VIDEO OUT)
(Yellow)
Connect the rear monitor. (
(R)(Red)
Pre-Out Connector (front)
To an external amplifier.
(L)(White)
(R)(Red)
Pre-Out Connector (rear)
To an external amplifier.
(L)(White)
Remote-Out Lead
(Black)
To Remote-In of connected device.
(R)(Red)
Video Input Terminal (AV2 IN)
Connect a TV tuner, VCR, camcorder, other
(L)(White)
brand's car navigation system, etc.
(Yellow)
15)
Camera Input Terminal (CAMERA IN)
(Yellow)
Connect a rear view camera. (
10
a
page 14)
(a
page
a
page 13)
11
CQ-VD5005W
Advertisement
Table of Contents
