Remote Controller; Rm-Rk230; Main Elements And Features - JVC KD-AVX1 Instructions Manual

Remote controller —
Installing the lithium coin battery
(CR2025)
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the receiver. Make sure
there is no obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it
may explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
The receiver is equipped with the steering
wheel remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
8

RM-RK230

Remote
sensor
IMPORTANT:
If Dual Zone is activated (see page 40),
the remote controller only functions for
operating the DVD/CD player.
MONITOR CONTROL
1 Monitor control buttons*
•
DVD/RECEIVER CONTROL
2
• Turns on and off the power and also
3 SOURCE button
• Selects the source.
4 BAND button
• Selects the FM/AM/DAB bands.

Main elements and features

MONITOR CONTROL
MODE ASPECT
DVD / RECEIVER CONTROL
ZOOM
ATT
+10
SOURCE
–100
PRESET
/ TITLE
BAND
–10
DUAL
1 2
DISC +
VOL
TOP M
4 5
2nd VOL
ENTER
7 8
DISC –
SETUP
0
SHIFT
RM-RK230
(standby/on), MODE, ASPECT,
MENU, and .
(standby/on attenuator) button
attenuates the sound.
MENU
+100
/ TITLE
OSD
3
MENU
6
9
RETURN
1