RIGGING AND SUSPENSION
The X9 Sub is intended to be used with a standard M20 screw thread style satellite pole mount
(available from P.Audio) for mounting the XT-8 or XT-10 above it. The XT-15Sub MUST be
located on a level surface that is capable of safely supporting the weight of both the XT-15Sub
and the XT-8 or XT-10.
WARNING: The pole used to mount the XT-8 or XT-10 must NOT be more than 1.25
meters (49 inches) long. DO NOT use a pole that is longer than 1.2 meters! DO NOT
PLACE ANY OTHER LOUDSPEAKERS, EXCEPT THE XT-8 or XT-10 on the XT-
15SUB'S POLE.
WARNING: DO NOT ATTEMPT TO SUSPEND P.AUDIO PRODUCTS WITHOUT
UNDERSTANDING LOCAL AND NATIONAL CODES THAT APPLY TO OVERHEAD
SUSPENSION OF PRODUCTS.
DO NOT ATTEMPT TO SUSPEND P AUDIO PRODUCTS UNLESS YOU ARE A
PROFESSIONAL WITH KNOWLEDGE OF LOCAL AND NATIONAL CODES
RELATED TO SAFE SUSPENSION AND ARE EXPERIENCED IN SUSPENDING
PRODUCTS OVERHEAD.
P.AUDIO IS NOT RESPONSIBLE FOR FAILURES RELATED TO NON-COMPLIANCE WITH
LOCAL AND NATIONAL CODES AND SAFE SUSPENSION PRACTICE. ALL ASSOCIATED
RIGGING IS THE RESPONSIBILITY OF OTHERS.
APPLICATION AND TROUBLE SHOOTING TIPS
The XT Series products make up a series of high-quality professional sound reinforcement
systems designed for use in both indoor, and dry outdoor applications. Some basic precautions
will insure long-term reliability.
EQUALIZATION AND GAIN
The XT-15Sub has all the required equalization and gain functions included in the internal
analog signal processing circuits. Both the equalization and gain functions have been optimized
for best bass output, flat frequency response and maximized system dynamics.
The system gain may be set by the on-board gain functions as well as any outboard mixing
console gain and EQ functions. If distorted sound is heard the gain and EQ settings on BOTH
the XT-15Sub amplifier and the outboard mixer should be carefully checked to ensure that the
input section of the XT-15Sub is not overloaded.