P.Audio XT-15Sub User Manual page 11

1200w (peak) active 15” subwoofer
Table of Contents

Advertisement

The X9 amplifier module MUST be serviced by a company authorized by P. Audio.
Replacement of Components
REPLACEMENT OF COMPONENTS MUST BE PERFORMED BY A QUALIFIED
TECHNICIAN OR ONE KNOWLEDGABLE IN THE REPLACEMENT OF
TRANSDUCER COMPONENTS!
DO NOT ATTEMPT ANY REPAIRS UNLESS THE XT-15Sub AMPLIFIER HAS
BEEN DISCONNECTED FROM THE AC MAINS SOURCE!
In the event of woofer failure, the woofer may be accessed by removing the front grille and then
removing the woofer. This should be done by a qualified technician or contractor. There is no
need to remove the amplifier panel in the event of a woofer failure.
USE EXTREME CARE WHEN HANDLING THE XT-15Sub AMPLIFIER MODULES.
THE COMPONENTS ARE FRAGILE AND THE MODULE MUST NOT BE SET
DOWN ON THE COMPONENT SIDE OR DAMAGE WILL OCCUR!
Care should be exercised when disconnecting the amplifier module from the woofer. Be sure to
observe the wiring polarity of the woofer.
Thank you once again for purchasing this P.Audio product. P.Audio is a manufacturer of a
complete range of Loudspeaker systems, individual components and accessories. For more
information regarding any of P.Audio's products or advice on how to set up and use this
product, please do not hesitate to use the contact details below to contact us.

Advertisement

Table of Contents
loading

Table of Contents