System - D-Link DAP-1160 User Manual

Section 3 - Configuration
Save to Local
Use this option to save the current access point
Hard Drive:
configuration settings to a file on the hard disk of the
computer you are using. Click the Save button. You will
then see a file dialog where you can select a location
and file name for the settings.
Upload from
Use this option to load previously saved access point
Local Hard Drive:
configuration settings. Click Choose File to find a
previously saved configuration file. Then, click the
Upload Settings button to transfer those settings to
the access point.
Restore to
This option will restore all configuration settings back
Factory Default:
to the settings that were in effect at the time the access
point was shipped from the factory. Any settings that
have not been saved will be lost, including any rules
that you have created. If you want to save the current
access point configuration settings, use the Save
button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Reboot the
Click to reboot the access point.
Device:
D-Link DAP-1160 User Manual

System

33