LanParty NFII Ultra A+ User Manual page 38

2
English
1.1.3 Intelligence
CPU Temperature Protection
The CPU Temperature Protection function has the capability of
monitoring the CPU's temperature during system boot-up. To pre-
vent CPU overheat and damage, the system will automatically
shutdown once it has detected that the CPU's temperature ex-
ceeded the temperature limit pre-defined by the system.
Over Voltage
The Over Voltage function allows you to manually adjust to a
higher core voltage that is supplied to the CPU, AGP, DRAM and/
or chipset. Although this function is supported, we do not recom-
mend that you use a higher voltage because unstable current
may be supplied to the system board causing damage.
CPU Overclocking
The CPU Overclocking function allows you to adjust the proces-
sor's bus clock. However, overclocking may result to the proces-
sor's or system's instability and are not guaranteed to provide
better system performance.
Dual Function Power Button
Depending on the setting in the "Soft-Off By PBTN" field of the
Power Management Setup, this switch will allow the system to
enter the Soft-Off or Suspend mode.
Wake-On-Ring
This feature allows the system that is in the Suspend mode or
Soft Power Off mode to wake-up/power-on to respond to calls
coming from an external modem or respond to calls from a
modem PCI card that uses the PCI PME (Power Management
Event) signal to remotely wake up the PC.
38
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of ≥ 720mA.