Baumatic BWMC253SS User Manual page 29

o This appliance is supplied with a moulded plug, which must be
connected to an earthed socket.
o If in future you need to change the fuse in this plug, then a 13 amp
ASTA approved (BS 1362) fuse must be used.
o If the earthed socket is not accessible after the appliance is
installed. Then the microwave must be wired into a 13 A double
pole switched fused spur outlet, ha
and placed in an easily accessible position adjacent to the
appliance. The spur outlet must still be accessible even when your
m icrowave is located in its housing.
The wiring in the mains lead is colo
o
Brown
Blue
Green and yellow
As the colours of the wires in the appliance's mains lead may not
o
correspond with the coloured markings identifying the terminals in
your spur box, please pr
The brown wire must be connected to the terminal marked "L"
(live), or coloured red.
The blue wire must be connected to the terminal marked "N"
(neutral), or coloured black.
T he green and yellow wire must be connected to the terminal
marked "E" (earth), or by the earth symbol, or coloured green and
yellow.
When the connection is completed, no stray strands or cut wire
o
should be present. The cord clamp must be secured over the outer
sheath.
Broken or damaged power leads must only be replaced by a
o
suita b ly qualified person. A power lead of a similar type must be
used i n replacement.
Before beginning to install your appliance, check that
there is no sign of damage (on the
of the microwave), and that there are no packing
materials or accessories inside the cavity. Remove any
protective film on the microwave.
ving 3 mm contact separation
ured as follows:
Live
Neutral
Earth
oceed as follows:
inside or the outside
29