ZMODO IP Camera User Manual page 15

Chapter 2 Access to IP Camera on iOS and Android Device
Note
For Wi-Fi IP Cameras, you can now disconnect the network cable and place the camera anywhere
within the Wi-Fi signal range (as Figure 12).
Figure 12
▲Method Three: Manually Add
From the List tab, click the [+] icon (As Figure 2), this will take you to the "Add Device" section (As
Figure 13).
[ID] Enter device's 10-digit ID (found from IP Camera's label).
[Name] Enter device's name, with maximum 60 chars.
[User Name] Login in or access device with user name; default user name is "admin".
[Password] Access device with relevant password; default password is "111111".
Figure 13
After setting all the parameters, click [Done].
14