Table of Contents
Advertisement
▲Wireless Settings (Only for Wi-Fi IP Cameras)
[WIFI] Select this checkbox to open the Wi-Fi network function of IPC.
[DHCP] If the router has DHCP enabled, select this, and the IP camera will automatically obtain an IP
address from the router.
[IP Address] Set wireless IP address of IP camera.
[Subnet mask] Default: 255.255.255.0 (It is recommended to not change the Subnet mask.)
[Gateway] Set the gateway IP of IPC. For example, if the IP Camera accesses a public network
through the router, the gateway IP needs to be the same as the router's IP Address.
[MAC] The MAC address of the IP camera (It is recommended to not change the MAC address.)
[DNS address] If the user has a DDNS account, the DNS address needs to be set to the DNS address
of the place to which the device is assigned to in the DNS account.
Please check out section "4.1.3 Wi-Fi Configuration" for more information.
Chapter 4 Access to IP Camera on Internet Explorer
Figure 29
102
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IP Camera and is the answer not in the manual?
Questions and answers