Processing And Presets - Adamson Systems Engineering M15 User Manual

Section 4.0

Processing and presets

Adamson recommends processing signals with the Adamson M Series digital processor, but factory presets are
available for approved digital signal processors, and are available through either the official Adamson website (link be-
low) or by request.
www.adamsonproaudio.com technical_support/presets/index.htm
M-series Processor Presets are determined through polar measurements and spacial averages to optimize equalization,
crossover points and time alignment.
M15 Preset librairies for XTA's processors can be obtained from the Adamson website, by request from your local
Adamson distributor or the Adamson Head office, and are applied using audio-core software.
Below is a reference chart of XTA DP224 V.11 presets.
Adamson's X-Link software controls the M-Series Digital
For up to date presets check the above website link.
Processor.
M15 User Manual Page 7 of 24