Trip Computer Screen - Clarion NX700 Quick Start Manual

If you tap the previous button, this one replaces
it.
Most of the fields on this screen have a
attached to is shown on the map as a Trip Data. It also shows the position of the data as follows:
Symbol
This value is not shown on the map screen.
This value appears on the map screen in the Trip Data area. This is the value at the
top.
This value appears on the map screen in the Trip Data area. This is the value in the
middle.
This value appears on the map screen in the Trip Data area. This is the value at the
bottom.

4.1.7.1 Trip Computer screen

The Trip Computer screen provides collected trip data. It can be opened from the Trip Information screen
by tapping
The fields on this screen are continuously updated while you keep the screen open.
You can switch between the trips, pause then resume them, or reset their data.
You have the following functions on this screen:
Button
Pauses the trip currently shown on the screen. Values on the screen stop changing.
This button replaces the previous one if it has been activated. Tap it to resume
collecting trip data.
Resets all counters of the currently shown trip. Collecting trip data is restarted only
when Clarion Mobile Map receives a position from the GPS.
Cycles through all trips.
,
symbol next to them. This symbol shows whether the field it is
.
Tap this button and the Route
Data fields show information
about
again.
Description
Description
the final destination
65