Control Elements - Behringer TUBE ULTRAGAIN MIC200  User Manual

TUBE ULTRAGAIN MIC200

2. CONTROL ELEMENTS

Fig. 2.1: User interface of the MIC200
2.1 User interface
The GAIN control allows you to control the gain from +26 to
+60 dB to the input signal. This control should be set all the
way to the left when (dis)connecting a sound source from the
MIC200. When all connections are made, slowly start raising
the gain control.
We recommend using the LED meter to adjust gain. The
LED chain displays the output signal level in dB. Please make
sure that the clip LED never lights up permanently.
4
2. CONTROL ELEMENTS