Brother TX-325 Operation Manual page 8

OPERATION MANUAL
-- On-hook + pre-dialing number + OK + N (N =1 ~ 9, 0, *, # )
-- On-hook + incoming call + OK + N ( N = 1 ~ 9, 0, *, # )
-- Dial out: on-hook + M.. + N ( N = 1 ~ 9, 0, *, # )
3. Phone Book memory
Incoming call + OK + PHONE BOOK + edit of phone book + OK
3.2.11 Ringer volume control
Ringer volume can be adjusted to 3 different levels of OFF / L / H by the slide switch at the
bottom.
3.2.12 Ring Indicator (Ringer LED)
The ring indicator will be blinking when there is an incoming call.
3.3 Operation at the off-hook state
3.3.1 Checking incoming and outgoing calls
You can use UP or DOWN key to view the information of the incoming calls including phone
number, date and time. Press REDIAL/
3.3.2 Dialing for display mode
During the number shown on LCD such as incoming call, outgoing call and phone book memory,
press SPEAKER /
3.3.3 Dialing Two-touch memory
Picks up the handset or press SPEAKER key and press M.. key and N (N=1 ~ 9, 0, * or #).
3.3.4 Call Time
Rev: 4
key or pick up handset to dialing out the number.
key to check outgoing call record with call duration.
P.8