OPERATION MANUAL 2. INSTALLATION Connect one end of handset coil cord to Handset and the other end to Base Unit. Use the straight Line Cord to connect the Base Unit at socket (13) to Wall Outlet. Care must be taken to ensure that the sockets match the respective plugs. In case your house is not equipped with a compatible wall outlet, you may need an adaptor, or you should consult your distributor/retailer for assistance.
OPERATION MANUAL 3. TELEPHONE OPERATION Phone Setting At the on-hook or off-hook state, press OK key into the setting mode, and the LCD will display: VIEW MENU Use UP or DOWN key to select among different items. When you choose one item, press OK key again to go into its setting.
OPERATION MANUAL to select among 5 different contrast levels the one that you prefer. The default setting is 3. 3.1.4 Set Flash When the LCD displays SET FLASH , press OK key and then use UP or DOWN key to select the flash time: 100ms, 120ms, 300ms, 600ms.
OPERATION MANUAL Operation at on-hook state 3.2.1 Receiving incoming FSK & DTMF caller ID When receiving a phone call, the LCD will display the phone number together with the information of name, date, time, and the number if user had applied for the Caller ID service. A new number will carry a “NEW”...
OPERATION MANUAL 3.2.6 Pre-dialing Enter a phone number and press SPEAKER / key to dial out. For any input mistakes, press C key to correct. 3.2.7 Babycall dialing Press any key except the OK key to dial out the pre-set number when BABY CALL function has been turned on.
OPERATION MANUAL -- On-hook + pre-dialing number + OK + N (N =1 ~ 9, 0, *, # ) -- On-hook + incoming call + OK + N ( N = 1 ~ 9, 0, *, # ) -- Dial out: on-hook + M.. + N ( N = 1 ~ 9, 0, *, # ) 3.
OPERATION MANUAL The display shows the duration of a call in progress since a number has been dialed out. Manual control is not available. 3.3.5 Pause key Press PAUSE key to insert a delay time of 3.6 seconds in a dialing sequence. 3.3.6 Mute key During phone conversation, if you do not want the person on the line to hear your voice, press...
OPERATION MANUAL to deactivate the speaker phone when the call is over. 3.4.2 Speaker volume control To change the speaker volume, press VOL key to adjust the volume levels during off-hook state. Rev: 4 P.10...