Pc With Wi-Fi Adapter - D-Link DSL-6740U User Manual

DSL-6740U VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

PC with Wi-Fi Adapter

1. To connect the router to a DSL line: connect a phone cable between the DSL port of the
router and the MODEM port of the splitter. Connect your phone to the PHONE port of the
splitter. Then connect another phone cable between a phone jack and the LINE port of the
splitter.
2. To connect the router to an Ethernet line: connect the Ethernet cable between any of four
Ethernet ports located on the back panel of the router and the Ethernet line.
3. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
4. Turn on the router by pressing the ON/OFF button on its left side panel.
5. Turn on the router's wireless connection by pressing the WLAN button on its left side panel.
6. Turn on your PC and wait until your operating system is completely loaded.
7. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are
equipped with a button or switch that turns on/off the wireless adapter (refer to your PC
documents). If your PC is equipped with a pluggable wireless NIC, install the software
provided with your Wi-Fi adapter.
Page 25 of 158
Installation and Connection