D-Link DSL-6740U User Manual page 115

DSL-6740U VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
To enable the Ethernet WAN function, follow the steps below.
1. Place the mouse pointer on the router's LAN port that will be used as the WAN port and
click the Make WAN line in the menu displayed.
2. On the opened page, select the needed value from the Ethernet WAN type drop-down list.
Single service over one connection: if you need to assign one WAN
•
connection to the created Ethernet WAN interface.
VLAN MUX Mode: if you need to assign one or more tagged VLAN connections or
•
several untagged connections to the created Ethernet WAN interface.
Click the Save link.
3.
If in the future you need to disconnect the LAN port from the private Ethernet line, on the
Advanced / Interface grouping page, place the mouse pointer on the port that is used as the
WAN port and click the Default line in the menu displayed. Then click the Save button.
To create a new rule for interface grouping (a group of ports), click the Add group button (the
button is not displayed if there is no WAN connection in the system).
Figure 86. The page for adding a new group of ports.
Page 115 of 158
Configuring via Web-based Interface