Table of Contents
Advertisement
Taking pictures/videos
Using Panorama in SCN mode
Use panorama to "stitch" up to 3 pictures into a panoramic scene.
NOTE: For best results, use a tripod. Only the panoramic picture is saved; individual pictures are not.
(Exposure and white balance are set with the first picture. The flash is set to Off.)
1 Turn the Mode dial to SCN.
2 Press
(depending on the direction you want to pan), then press OK.
3 Take the first picture.
After a quickview, the LCD displays the liveview and an "overlay" from the first picture.
4 Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture.
5 If you are taking/stitching only 2 pictures, press OK to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
Take
2 or 3
pictures.
Get 1
panoramic
picture.
NOTE: To use the self-timer 10-second or 2-second setting, see
16
IMPORTANT: In Panorama SCN mode, you take 2 or 3
to choose Panorama Left-Right or Panorama Right-Left
pictures which the camera "stitches"
together in a panorama.
In Automatic Panorama mode—found in
Creative mode
"sweep" the camera in a continuous arc.
The camera then creates a panorama.
page
21.
www.kodak.com/go/support
(see
page
18)—you
Advertisement
Table of Contents
