How to open the front cover
PC CARD EJECT
SD CARD
PUSH-EJECT
STR
F
/
/
TV/AV
S VIDEO
VIDEO
L
R
PC
AV3
Terminal cover open and close
Open
1. Push down hooks and pull the
2
1
2. Slowly pull out in the downward
Fastening method
Clamper
Fastening of Power Cable and other cables
1
2
Fastening method of Power Cable
1. Insert the power plug into the main body.
2. Fasten with the Power Cable fastening band.
Ofrecido por www.electromanuales.com
cover slightly towards yourself to
disengage the claws (at 4 points).
direction.
Open
Close
1
2
SD CA
RD
T
-EJ EC
PU SH
Push " ".
Close
2
1
1
When connecting to the rear AV Input / Output terminals,
connect through this window. (This window cannot close
completely when connecting the cables.)
Other cables should be connected before closing the
terminal cover.
Fastening method of other cables
Attach the clamper on the installation hole, and fasten them.
Bundle the cable with the cable fastening clamper.
Fastening band
Fastening
To tighten.
1. Insert the claws (at 4 points)
at the bottom end.
2. Push until it clicks.
Loosening
2
Pull off.
Keep the knob
pressed.
1
7