Panasonic TH-50PV30 Operating Instructions Manual page 28

PC mode
Picture Pos. /Size
During PC mode
Press the MENU button.
Move to choose Picture Pos. /Size.
Access Picture Pos. /Size.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to exit Picture Pos. /Size.
Note:
Press the N or OK button whilst the cursor is at the "Normalise" position
to reset all settings to their default levels.
H-Pos Adjust the horizontal position.
V-Pos Adjust the vertical position.
Clock Phase Eliminate the flickering and distortion.
Signal
During PC mode
Press the MENU button.
Move to choose Signal.
Access Signal.
Adjust Sync.
Press the EXIT button at any time to exit Signal.
Sync H & V : To synchronize by the horizontal and vertical signals from your PC.
on G : To synchronize by the green signal form your PC (if available).
28
Ofrecido por www.electromanuales.com
PC Menu
MENU
OK
Picture Pos. /Size
Normalise
EXIT
H-Size Adjust the horizontal size.
V-Size Adjust the vertical size.
PC Menu
MENU
OK
Signal
Sync
EXIT
Picture
Picture Pos. /Size
Signal
Normal
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Picture
Picture Pos. /Size
Signal
H & V
H-Freq. 0.0 kHz
V-Freq. 0.0 Hz