Aspect Controls - Panasonic TH-50PV30 Operating Instructions Manual

Aspect Controls

The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen
cinema format pictures.
Press the ASPECT button repeatedly to move through the
aspect options:
AUTO, 16:9, JUST, 4:3, ZOOM1, ZOOM2 and ZOOM3
PC mode: 16:9, Just, 4:3 and Zoom
Press the ASPECT button. Whilst the on screen selector
keys are displayed, use the Red or Green buttons to move
in either direction through the aspect options (except PC
mode and Photo View mode).
Note:
This function is not available during 1080i signal input.
AUTO
AUTO position can be set to 16:9. When a wide screen signal is detected at
the Video terminal the TV will select the 16:9 aspect ratio.
16 : 9
16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions.
Signals in the 4:3 format will be stretched to fit the picture.
JUST
Use JUST when you wish to expand a 4:3 picture to fill the whole screen (rather
than watching a programme with black stripes down the left and right sides of
the picture).
The 4:3 picture will be stretched horizontally so that the image fills the screen,
this is done in such a way that the stretching is only obvious at the left and right
edges of the screen.
4 : 3
4:3 will display a 4:3 picture at its standard 4:3 size with no aspect distortions.
ZOOM1
ZOOM1 allows you to magnify the picture.
ZOOM2
ZOOM2 will display 16:9 anamorphic letterbox pictures as a full screen display
with no aspect distortions.
ZOOM3
ZOOM3 will display 21:9 letterbox pictures as a full screen display with no
aspect distortions.
16:9 will display the picture at its maximum size but with slight stretching.
24
Ofrecido por www.electromanuales.com
OR
ASPECT
Red Green
Example
AUTO
16 : 9
JUST
4 : 3
ZOOM1
ZOOM2
ZOOM3
OK
N
1 2 3
4 5 6
7 8 9
C 0
TV
AUTO
16 : 9
JUST
4 : 3
ZOOM1
ZOOM2
ZOOM3