Using The Self-Timer; Using Burst - Kodak EASYSHARE C195 Extended User Manual

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any picture-taking mode, press the Info
2 Press to highlight the self-timer
10 seconds—
to get into the scene).
2 seconds—
release on a tripod).
2 shot—
is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.

Using burst

Use the burst feature to take up to 3 pictures in rapid succession. You can turn on
burst using a shortcut
1 Press the Menu
2 Press to choose Self-timer/Burst, then press
3 Press the Menu
4 Compose the scene. Press the Shutter button halfway, then completely down
and hold it.
The camera stops taking pictures when you release the Shutter button, when pictures
are taken, or when there is no more storage space. Burst is unavailable in some modes.
www.kodak.com/go/support
A picture is taken after a 10-second delay (so you have time
A picture is taken after a 2-second delay (for a steady, shutter
The first picture is taken after a 10-second delay. A second picture
(see page 10) or these steps:
button.
button.
Taking pictures/videos
button to turn on the shortcut icons.
icon. Press
to choose Burst On.
to choose a setting:
11