Installation; Operating Instructions - FANATEC G Wireless Controller Manual

Installation

Connect your WIRELESS Controller's receiver to your
PlayStation 2 console only when it is deactivated.
®
Pay attention to the correct placement of 2 AA batteries in the
controller, incorrect polarisation may render the WIRELESS
Controller defective. Turn on your PlayStation
ensure correct calibration of the analogue thumbsticks and the
action buttons, make sure that sticks and buttons remain in
their natural position when the controller is turned on using
the Vibration ON/OFF Button. Moving the sticks and/or pressing
the action buttons while the console starts up may result in
incorrect calibration and requires you to restart your
PlayStation 2 console and repeat the above steps.
®

Operating Instructions

Your WIRELESS Controller offers three operating modes, Digital,
Analogue and Turbo Mode. The LED entitled "ANALOG" indicates
the currently activated mode.
Use the ANALOG Button to switch between Analogue and
Digital Mode.
5
2 console. To
®