5
Loading Paper and Calibrating
a. Open the paper tray.
Paper Tray
Left Paper-edge Guide
b. Pull out the paper tray extender until it is fully extended.
Paper Stop
c. Lift the paper stop.
d. Make sure the left paper-edge guide is to the far left.
Paper Tray Extender
e. Carefully fan and stack the paper, then insert it into the tray.
f. Move the paper forward until it stops.
g. Move the left paper-edge guide until it stops.
h. Press Start. Calibration will take two to three minutes.
OK
6
www.kodak.com/go/aiosupport
Need help?
Do you have a question about the ESP 3200 and is the answer not in the manual?
Questions and answers