Windshield wiper/washer switch
Move stalk briefly up for single wipe without adding
washer fluid (use only when windshield is wet).
Pull stalk toward steering wheel and hold to activate
wiper and washer.
Wiper off
Windshield wiper/washer
Instruments
Operation
and controls
Ofrecido por www.electromanuales.com
Move stalk down for:
Move stalk up for:
1 At speeds of approximately 105 mph (170 km/h) the wiper
95
Instrument
Driving
Practical hints
cluster display
Intermittent wiping
(Interval is vehicle speed dependent
Optional rain sensor: One initial wipe, pauses
between wipes are automatically controlled by a
rain sensor monitoring wetness of windshield.)
Notes:
With vehicle at a standstill, a front door open and
the key in steering lock position 2 there will be no
operation of windshield wipers in intermittent
setting.
Optional rain sensor:
Do not leave in intermittent setting when vehicle
is taken to an automatic car wash or when
cleaning the windshield. Wipers will operate in
presence of water spray at windshield, and wipers
may be damaged as a result.
Normal wiper speed
Fast wiper speed
switches automatically to continuous wiping.
Technical
Car care
1
.
Index
data