Mercedes-Benz M-class ML 55 AMG Operator's Manual page 250

6. Place jack on firm ground. Position the jack under
the take-up bracket so that it is always vertical
(plumb-line) as seen from the side, even if the
vehicle is parked on an incline.
7. Open jack further until jack arm end seats firmly in
the take-up bracket and its base sits squarely on the
ground. Jack up the vehicle until the wheel is clear
of the ground. Never start engine while vehicle is
raised.
Tires, Wheels
Instruments
Operation
and controls
Ofrecido por www.electromanuales.com
8. Unscrew and remove all wheel bolts. Keep bolt
9. Remove wheel. Grip wheel from the sides. Keep
10. Lower vehicle to ground. Remove jack.
Before storing the jack, it should be fully collapsed, with
handle folded in.
For proper storage of jack see page 237.
247
Instrument
Driving Practical hints
cluster display
threads protected from dirt and sand.
hands from beneath the wheels.
Clean contact surfaces of wheel and wheel hub.
Install spare wheel on wheel hub. Insert wheel bolts
and tighten them slightly.
Technical
Car care Index
data