Mercedes-Benz M-class ML 55 AMG Operator's Manual page 87

Instruments
Operation
and controls
Trip computer
To change an entry, select mode to be changed:
• Date –
Press RESET key, the month shown blinks. Now
press MODE key to advance to selected month.
Press RESET key again, the day shown blinks. Now
press MODE key to advance to selected day.
Press RESET key again, the year shown blinks. Now
press MODE key to advance to selected year.
Press RESET key again, the display stops blinking
and the date is set.
• Compass –
The compass displays the direction the vehicle is
traveling, such as N, NE, E, SE, S, SW, W or NW.
Note:
The presence of buildings, bridges, power lines and
large antenna masts can influence the displayed
values. Metallic or magnetic objects in or on the
vehicle can influence the accuracy of the compass.
Ofrecido por www.electromanuales.com
Instrument
Driving Practical hints
cluster display
84
To change the compass zones:
Determine the geographical point of the vehicle with the
aid of the zone maps below:
1. Turn key in steering lock to position 2.
2. Press MODE key repeatedly until the compass
3. Press RESET key to select the compass zone mode.
4. Press RESET key repeatedly until the correct
5. Press MODE key twice to activate the new compass
Technical
Car care
display appears in the trip computer display.
The zone selected last is shown in the display.
compass zone, as determined from the zone map, is
shown in the display.
zone and change back to compass display.
Index
data