Password (2): Input the password assigned by your Internet
L2TP
Gateway (3):
MTU (4):
Connection
type (5):
Idle Time
Out (6):
When you finish with all settings, click Apply (7) and the following
message will be displayed on your Web browser:
Click Continue to go back to the setup menu or to continue to other
setup procedures, or click Apply to reboot the router so the settings
will take effect (wait about 40 seconds while router is rebooting).
If you decide to reset all settings on this screen back to previously
saved values, click Cancel.
service provider.
Input the IP address of the PPTP gateway
assigned by your Internet service provider.
Input the MTU value of your network connection. If
you don't know it, you can use the default value.
Select the Internet connection type you want to use
(refer to 2-5-3 for details).
Input the idle time out of the Internet connection
(refer to 2-5-3 for details).
55