Setup Procedure For Pptp - Manhattan 525541 User Manual

Click Continue to go back to the setup menu or to continue to other
setup procedures, or click Apply to reboot the router so the settings
will take effect (wait about 40 seconds while router is rebooting).
If you decide to reset all settings on this screen back to previously
saved values, click Cancel.

2-5-4 Setup procedure for PPTP:

PPTP requires two kinds of settings: WAN interface setting (setup
IP address) and PPTP setting (PPTP user name and password).
First, the WAN interface settings:
Select the manner in which you obtain an IP address from your
service provider: Obtain an IP address automatically (equal to
DHCP; refer to Cable Modem above); or Use the following IP
address (i.e., static IP address).
WAN interface settings must be correctly set; otherwise, the
Internet connection will fail even if the PPTP settings are correct.
Contact your service provider if unsure which to select.
52