Caller List; Missed Calls; Talking Caller Id - Panasonic KX-HNH100 Operating Instructions Manual

Making/Answering Calls
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.

Missed calls

If a call is not answered, the unit treats it as a
missed call. The display shows "Missed
call".
Note:
R Even when there are unviewed missed
calls, "Missed call" disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the charger.
– Pressing MOFFN on a handset.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the

caller list.

Talking Caller ID

This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your
service provider/telephone company.
– turn this feature on (page 24).
When caller information is received, the
handsets announce the caller's name or
phone number received from your service
provider/telephone company following every
ring.
The unit announces in English only.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller's
name is too long, the unit may not be able
to display or announce the entire name.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
14
For assistance, please visit www.panasonic.com/support
phonebook, the stored name in the
phonebook is announced.
Caller list
The last 50 callers information is logged in the
caller list from the most recent call to the
oldest.
Making a call from the caller list
1
MCN CID
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press M
To exit, press MOFFN.
Note:
R If the entry has already been viewed or
answered, " " is displayed.
Editing a caller's phone number in
the caller list
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code "1".
1
MCN CID
2
MbN: Select the desired entry.
3
MMENUN a MbN: "Edit" a MSELECTN
4
Press MEDITN repeatedly until the phone
number is shown in the desired format.
5
M N
Note:
R The number edited in step 4 will not be
saved in the caller list.
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
N.