Fujitsu ScanSnap Advanced Operation Manual page 108

Scanning Documents Such as Photographs and Clippings (For iX500, S1500, S1500M, S1100, or S510)
3.
Click the [OK] button to close the ScanSnap setup window.
ATTENTION
l The scanned image is output at the center of the page in the size specified in the [Paper size] drop-
down list of the [Carrier Sheet Settings] window.
l If [Automatic detection] is specified for [Paper size] in the [Carrier Sheet Settings] window, an
optimal size will be selected automatically from the available standard sizes (A3, B4 or 11 × 17 in.)
from the same drop-down list. Note that the size of the image may become smaller than the original
document depending on the document scanned, or part of the image may appear missing.
Example: When an A5 size image is printed in the center of an A4 size document
a The scanned image is output in A5 size.
To output the scanned image in its original size, specify the document size in the [Paper size] drop-
down list.
HINT
For details about how to place documents into the Carrier Sheet and on the ScanSnap, refer to the
ScanSnap Manager Help.
108